We proudly introduced a new 12-piece forstner bit set early last month. Thank you to all who provided feedback on our previous set of forstner bits! We took that information and made sure we were providing customers with a quality product with this new forstner bit set.
Read the product review below to learn more about the efficient design, and tips and tricks for use.
Hex Head Shank and Saw-tooth Design
Instead of the conventional round shank, these forstner bit shanks are hexagon shaped. This design makes it easier to tighten the chuck in order to prevent slippage as the bit bores into wood.
The forstner bits in this set also feature durable saw-tooth cutting edges. This type of design allows users to easily dispel the wood chips and apply less downward pressure on the bits, which also results in less overheating and dulling of the cutting edge.
Each forstner bit is made from durable T10 steel, ensuring a longer life and cleaner drill use after use. Includes a wooden storage case with the size of the forstner bits listed on the slots in the case. The RPM is conveniently marked on the shank on each individual bit.
Tips and Tricks for Use
As with all forstner bits, the goal is to create consistent depth and flat bottom holes. In order to do so, we recommend the following:
- Use these forstner bits in a drill press rather than a handheld drill
- Run the forstner bits at the recommended speeds as listed on each bit
- Feather (increase/decrease) the cutting pressure to easily dispel the wood chips and to prevent overheating
- Clamp the wood down to the drill press table or place the wood part between clamps blocks to prevent the wood part from spinning in your hand
- Protect your hands with safe grip woodworking gloves and wear eye protection
- Ensure the drill press drive belt tension is suitable to prevent the pulley from spinning on the belt as you bore the holes into wood
Where to Buy?
This new forstner bit set is now available at Klockit.com! Search for item 53003 or click the link below:
Written By: John Cooper
John spent the better part of the 28 years he was employed by Klockit, designing hundreds of clock and furniture kits and plans and has continued with product design since his retirement in 2008. John’s love of clocks, his passion for creating furniture for his own home as well as for family, and his great appreciation for the beautiful finished pieces Klockit customers make from our kits and plans inspire him to continue to create still more new clock and furniture designs.